Connect with us

How To

How To Create Bootable USB Pendrive For Windows Installation

Published

on

How To Create Bootable USB Pendrive For Windows Installation: In this article, I am gonna show you the process of creating a bootable USB Pendrive for installation of Windows to your Laptop/Desktop.

Usually in windows is installed via CD-ROM but nowadays the desktops and Laptops are coming without an option of CD Drives, So in such cases, Bootable USB Pendrives are used to Install the Windows.

How To Create Bootable USB Pendrive

Step-1:

In the first step, you have to download the latest version of PowerISO software which is used to handle ISO files, you can download the latest version from Here!.

How To Create Bootable USB Pen Drive

You have to download the desired 32-bit or 64-bit version depending on your Desktop or Laptop.

Step-2:

How To Create Bootable USB Pen Drive

Now insert the desired USB Flash Drive or USB Pendrive into the USB Slot on your Desktop or Laptop.

Step-3:

Now open the PowerISO tool and navigate to “Tools > Create Bootable USB Drive”. The “Create Bootable USB Drive” dialog will popup. If you are using Windows Vista or above operating system, you need confirm the UAC dialog to continue.

How To Create Bootable USB Pen Drive

Now Pop Up dialog box will come on screen which ask your permission to run PowerISO in “Administrator Mode”, Just Click on “OK” and proceed further.

Step-4:

Now a new option will appear on screen namely “Create Bootable USB Drive” in this dialog box select the Image file of the required Operating System ISO file which you want to burn onto the USB Drive.

  1. Select the correct USB drive from the “Destination USB Drive” list if multiple USB drives are connected to the computer.
  2. Choose the proper writing method. “USB-HDD” is recommended.
  3. Click “Start” button to start creating a bootable USB drive.

Step-5:

How To Create Bootable USB Pen Drive

PowerISO will alert you that all data on the USB drive will be destroyed. Click “OK” to continue. The program will start writing the USB drive, and showing the progress information. You should get the message “Writing USB drive completed successfully.” after the operation completes.

Now a prompt will appear on screen after successfully creating the Bootable USB Pendrive stating that “Writing USB Drive completed Successfully” and the screenshot is attached below.

End

If no errors occurred in the above process, you should now be all set to setup How To Create Bootable USB Pendrive!

Also, See: How To Overclock Your GPU

Configuring the BIOS

You should now reboot and go into the BIOS configuration to boot from USB. Instructions for doing so vary wildly from system to system, but generally entail the following:

  1. Reboot the system.
  2. While booting (before Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Hotkey instructions are generally provided on the screen.
  3. Go to the section that contains your boot devices.
  4. With your USB drive plugged in, the USB drive should be listed. If it isn’t, your system might not support booting from USB. Assuming that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary boot device.
  5. Exit from the BIOS configuration, saving all changes.

Please notice that you can seriously screw up your system by providing incorrect BIOS settings!

Booting and Setup Windows From USB Drive

Assuming that you properly configured your BIOS and your USB drive supports booting,  Windows setup should now load. Depending on the speed of your USB drive, this may take a while.

If it isn’t working, then double-check the following before making a scene:

  • Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it have top priority?)
  • Have you correctly prepared the USB drive in step one? (Restart the procedure.)
  • Does your USB drive properly support being booted from? (Try another one!)

Note: The above guide works with Windows 10, Windows 7, Windows 8 / 8.1, or Windows Vista. For Windows XP with SP2 or SP3.

My Word On How To Create Bootable USB Pen drive

So that’s it in this article on How To Create Bootable USB Pendrive, I hope this might help you, feel free to share your views in the comment section below, Thanks for reading.

Also, See: How To Make Money On Instagram

Every one of us can be a Magician by gaining Info and Wisdom, Yes! Because Info works like Magic, and I am here to spread it.